Samsung Tv error code 101

Fix Samsung TV Error Code 101 [Easy Steps]

We have previously explained many Samsung Tv Errors, and now, we are going to explain Samsung TV Error Code 101. If you are a user with this error code then, this guide will resolve your problem. Nothing to worry about, just step forward with this tutorial, and at the end, hopefully, you will get your answer. So let’s start troubleshooting this error.

What is Samsung TV Error Code 101?

According to Samsung’s official announcement, Samsung TV Error Code 101 or Error_seedkey_101 indicates an invalid smart hub settings configuration. As per the official announcement, to fix this error code you have to call for a service repair but, some workarounds are present that can help to fix this error code from your side.

Also, Fix:

Samsung TV Error Code 107

Samsung tv error code 001 or Error_exe_001

Samsung TV Error Code 012

How to Fix Samsung TV Error Code 101?

Let’s learn the steps to fix this error code that usually indicates a smart hub inability.

How to Fix Samsung TV Error Code 101

Restart your device after doing a power cycle

Detach all the power cables from your TV and wait for 5 minutes at least. Now, plug all the cables and restart the TV and check if the error is appearing or not.

Internet Device and DNS settings

Maybe your internet speed and the wrong DNS settings cause the error code 101. So checking speed and changing DNS settings may help. 

To change DNS settings- Press Menu button-> Networks-> Network Status-> IP Settings-> Go to DNS Settings-> Select enter manually option-> Enter 8.8.8.8 or 8.8.4.4 and click on Yes. Now, reboot your smart tv and check for the error.

Additionally, updating the firmware to its latest version is a good idea. Whenever you update your TV’s firmware some glitches and issues have been resolved automatically. 

Reset Smart Hub

Reset the smart hub by following steps:

  • Go to the Settings menu of your TV.
  • Select Support option.
  • Now, choose the device care option and then select Device Diagnosis.
  • Click on the Reset Smart Hub option, and enter the pin (0000) when asked to enter.
  • Now, click the OK button, and that’s it.

Al last, if the problem is not resolved, call on 1800-88-9999 and request a service repair.

Leave a Reply

Your email address will not be published. Required fields are marked *