If we talk about the startup repair tool, this is a very important tool that is used to fix boot problems in Windows 10. It is also called a Windows recovery tool and is very helpful to your PC when it is facing a certain starting problem. Startup Repair feature is designed to fix most of the common issues that may be preventing your computer from loading properly.
In this Windows 10 guide, we’ll talk about the easy and very simple steps to fix boot problems in Windows 10 by using the startup repair tool. In Advanced Startup options, the startup repair tool is one of the recovery tools and this set of tools is present on the hard disk of your PC.
A recovery drive and Windows installation media. Sometimes, you start your PC and see the booting problem in front of you because of the slow performance of your PC. This guide will help you to remove this problem and will make your system perform better.
What is the boot problem in Windows 10?
When you restart your PC and you see a message before your windows begin to load, “Windows failed to start” and offers an option to “Launch Startup Repair (recommended)” by the Advanced boot options menu as shown in the figure. This is exactly the boot problem in Windows.
Fix startup problems in Windows 10 by using startup repair
You’ll need to access the Advanced startup settings to use the Startup Repair feature to fix boot problems with your Windows 10 PC. You can choose one of these three ways depending on your situation. All three ways are given below, you can choose one of them.
By Accessing Advanced startup when PC isn’t loading
This method is helpful when your device is stuck or not loading during the boot process. To access the advanced startup you have to follow these steps.
Step 1. Firstly, turn ON your PC.
Step 2. Now, as soon as the Windows logo appears on the screen press the Power button and this will immediately interrupt the boot sequence.
Step 3. Repeat step 1 and step 2 for two more times.
Now, windows 10 will open into the Advanced Startup environment after the third interruption. Now, you can continue with the steps below, to use the Startup Repair tool to fix booting problems with your Windows 10 PC.
By Accessing Advanced startup using bootable media
In case, If your device is not starting at all, you can use a USB installation media to get to the Advanced settings environment. Here are the steps to do so.
Step 1. Start your device using a bootable USB media.
Note – By using the flash drive, if your system is not starting then you’ll need to change the BIOS settings to make sure that it can boot from USB. By using or pressing one of the functions, Delete, or ESC keys, you can access the BIOS. But one thing that keeps in your mind that you should check your manufacturer’s support website for more information.
Step 2. Now, Click on the Next button.
Step 3. Check for the link, Repair your computer, in the bottom right corner and Click on this.
After completing this step use the steps below to continue to the Startup Repair tool.
By Accessing Advanced startup when PC is loading
Now, use these following steps to access the recovery environment by using the Startup Repair tool.
Step 1. Open Setting by clicking on it.
Step 2. Now, click on the Update & Security option.
Step 3. Click on the Recovery.
Step 4. Then, click on the “Restart Now” button under the “Advanced startup” section.
After the compilation of the above steps, your system can face the loading problem. In this case you should follow the following steps and continue to fix loading problems with your system using the automatic repair feature.
By Using Startup Repair to fix loading problems
You can use the following steps to fix loading problems by using Startup Repair in the Advanced startup environment option.
Step 1. First of all, click on the Troubleshoot button.
Step 2. Now, Click on the Advanced Option button.
Step 3. Click on the Startup Repair button.
Step 4. Now, select your account and type your account password then click on the continue button.
Note – You’ll get the “Start Repair couldn’t repair your PC” message, if your system is loading properly, using this tool. Because there’s nothing that needs to be fixed.
Now, the Start Repair feature will proceed to scan, detect, and fix the problems that may affect your device from loading correctly.
Also, the repair process creates a SrtTrail.txt file in the “C:\Windows\System32\Logfiles” folder with the log information and this will help you to diagnose your issue easily.
If you are still facing the problem then please go through the following steps.
Go to your system’s Windows directory > System 32 > Logfiles > Srt and open the SrtTrail.txt file into the Notepad which you are using. Now in this section, you can find the exact reason for failure of these important tips using startup repair.
Points to remember:
- If you are using the same steps for a long time then you should replace it with a clean copy of Windows 10.
- The process of replacement will take a longer time and it’ll erase everything on your system, but will help to fix the loading issues, battery life, as well as performance, and other issues.
Hope this article can help you to resolve your boot problems in windows 10 by using startup repair. Thanks..
Useful Link: List of More than 180 Windows 10 useful keyboard shortcuts
