Epson Projector is Not Turning On: Fix With These Methods [2024]

Posted by

If your Epson projector is not turning on, it may be due to the power button being locked – check this and unlock the power button. If this is not the culprit, overheating or a hardware malfunction may be the cause.

Over time, the projector’s lamp may stop working – the life of the lamp of an Epson projector is usually 3000 hours, if it exceeds this, the projector may refuse to turn on.

Fix Epson Projector is Not Turning On

How to Fix an Epson Projector That Won’t Turn On

Restart the projector

By performing a simple restart, you can resolve your problem. To restart the projector, follow these steps:

  • Turn off the projector.
  • Disconnect it from the power source.
  • Wait for a few minutes.
  • Then connect it and restart the projector.

Reset the projector connections

To reset the project connections, follow these steps:

  • Turn off your projector and the device you are using.
  • Disconnect the projector from the power source.
  • Now, unplug the video cable from the project and press the power button for 15–20 seconds.
  • Now, wait for a few minutes.
  • After that, restart it and connect your device to the projector.

Replace the projector Bulb

If your projector bulb has passed its lifespan, that may also lead to the problem. Generally, the projector bulb lasts for 2500 to 3000 hours.

Try to replace the bulb to solve your problem.

Verify the Cable Connection

If your cable connections are loose or damaged, that may also lead to the problem and hence the projector won’t turn on.

Ensure that the cable connections are properly connected and free from any damage.

Prevent the Project from Overheating

Ensure that your projector has enough space to escape the hot air through the projector’s vent.

If there is an obstruction or a blockage in front of the vent, the projector may begin to overheat.

Clean the Projector’s Air Filter

To clean the Epson projector air filter, follow these steps:

  • Disconnect the projector from the power source.
  • Access the air filter cover latch.
  • Then rotate the air filter.
  • Clean the filter.

Unlock the Power Button

To unlock the power button, follow these steps:

  • Press and hold the lock button.
  • Wait for 10–15 seconds.
  • Now turn on your projector with the help of the remote.

Contact Support

If none of the solutions work for you, then it’s time to contact Epson customer support for further assistance.

Visit to get support from the Epson team.

Preventive Measures

  • Perform regular maintenance tasks.
  • Use high-quality cables.
  • Place the projector in an optimal location.
  • Plug the projector into a functioning power outlet.


Why doesn’t my Epson projector turn on?

There could be several reasons why the Epson Projector won’t be on, such as power supply issues, lamp issues, loose connections, and overheating.

The Epson projector power button not working

If the Epson projector power button is not working, check if the projector is securely plugged into a working electrical outlet. For security purposes, the button may be locked – unlock it. If the button still does not work, there may be a hardware malfunction – you will need to replace the button. It is suggested to contact support or a verified Epson outlet.

Final words

Encountering the issue with the Epson projector can be frustrating- especially if it is not turning On, but you can overcome it by following the above-mentioned troubleshooting techniques.

Remember all the preventive measures to avoid issues with your Epson projector and enjoy your projection experience.

Don’t hesitate to contact Epson customer support for further assistance – if all hacks fail.

Leave a Reply

Your email address will not be published. Required fields are marked *